| 户外垃圾桶桶身部分 |
| 添加时间：2018/9/20 15:32:55 浏览次数： |
| 钢铁部分 Iron and steel parts 1.采用钢铁钢板弯制成型。 1. steel plate bending. 2.根据各自特征进行切割和焊接，并进行一些调整工序。 2. cut and weld according to their own characteristics and make some adjustment procedures. 3.将产品打磨除尘后进行酸洗、喷砂和静电喷涂。 3. grinding and cleaning products after acid cleaning, sandblasting and electrostatic spraying. 木条部分 Bar section 1.将原木开成椅条所需的规格、干燥处理（自然晾干或者蒸汽烘干） 1. the specifications and dry treatment of the logs to be made into chairs (natural air drying or steam drying). 2.然后进行一系列后期工序、保证椅条的 平整，方能进行油漆处理。 2. then carry out a series of later processes to ensure the smoothness of the chairs so that the paint can be processed. 3.将木头喷涂几遍底漆后进行打磨、去除木头表面毛刺，然后进行油漆的喷涂。 3. Spraying the wood primer several times, then grinding, removing burrs on the surface of the wood, and then spraying the paint. |
| 上一页 垃圾桶盛放形式 |
| 下一页 塑料环卫垃圾桶的制作工艺原理 |
Copyright © 技术支持：遨游网络